The DPE Series electric parallel grippers are plug and play and do not require any programming, tuning, or adjusting.  These 3W units can be driven directly by most PLCs without a separate power supply and can be battery driven for remote applications.  Tested for 20+ million cycles with zero maintenance (DPE-200), the DPE Series eliminates down time and offers the lowest cost of ownership for any pneumatic or electric gripper.  The built-in electronics are sealed within the gripper and an external control board is not needed.

​

• Fully integrated electronics, no programming or software, operates from PLC discrete open/close commands

• Reverse polarity protection to protect from application mis-wiring

• DIRECTCONNECT™ mounting to rotaries and slides without requiring adapter plates

 

DPE-200 Medium Duty

• Fast parts handling with grip speeds capable of 120 parts per minute

• High reliability, up to four times longer than pneumatic equivalents

• Maintenance free, internally lubricated and sealed

 

DPE-400 Heavy Duty

• Two stroke ranges from 0 to 10 mm and 0 to 20 mm

• Grip Force adjustability from 100% to 50% controlled from the 0 to-5VDC analog input

• Open and close sensing via built-in motor feedback signal